Dieser Artikel wird auftragsbezogen bestellt, ist somit vom Umtausch ausgeschlossen!In Produktions Neuauflag ist der der COM-ON-AIR kompatible PCMCIA TYP Wandler (Type 2 auf Typ 3) als Kleinserie wieder verfügbar. The Type Adapter extender board allows PCMCIA or Cardbus cards to be tested and debugged in PCMCIA a slot. Typically this extender is for use in a development or production environment. The extender routes all 68 signals via pin-headers for DSO or Logic Analyzer connection. There is a micro-switch to allow CD1# to be momentarily broken, simulating a card ejection / insertion, and a unique activity LED to show when 16-bit bus cycles are reaching the card. The extender also features a power LED to show when the card is live, and uses a full size TypeI, II or III compatible 3.3v / 5v keyed PCMCIA / Cardbus connector with an ejector lever to make card extraction simple. The area under the PCMCIA connector is cut away to allow access to the back of an un-framed card. A four layer PCB with GND flood on all planes ensures excellent signal propagation. For current consumption measurements, a 2-pin header is provided to allow Vcc to be broken and an ammeter inserted. Ceramic bypass capacitors at the PCMCIA connector ensure clean Vcc and Vpp. Ample GND test points are also provided.
|